AC 120V Power Outlet
PrecautionsWork Procedure
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the display unit. For details the operation, refer to "CONSULT Operation Manual".
Work Procedure [Display Unit]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specificat ...
When SRS is not activated in a collision
CAUTION:
WORK PROCEDURE
Check the SRS components using the table below.
Ensure entire SRS operates properly.
SRS INSPECTION (FOR FRONTAL COLLISION)
Part Inspection Driver air bag module If the driver air bag has not been activated:
Remove driver air bag module. Check harness cover and connectors ...
Adjustment
WARNING:
CAMBER
Adjust with adjusting bolt in front lower link.
Camber Refer to Wheel Alignment.
CAUTION:
When tightening the nut firmly and checking the torque, use a wrench to prevent the turning of bolt.
After adjusting camber, be sure to check toe-in.
After adjusting camber, be sure to perf ...