Nissan Armada 2025-2026 Service and Repair Manual: Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Oil seal remover |
|
|
| Sliding hammer |
| Removing differential assembly |
| Flange wrench |
| Removing and installing drive pinion lock nut |
| Puller |
| Removing companion flange |
| Separator |
| Removing pinion rear bearing inner race |
| Power tool |
| Loosening bolts and nuts |
Special Service Tools
The actual shapes of the TechMate tools may differ from those of the special service tools illustrated here.
Tool number
(TechMate No)
Tool name Description KV10111100
(NI-37228)
Seal cutter
Remov ...
Sealant or/and Lubricant
Item Use Genuine Liquid Gasket
(Three Bond 1217 or equivalent) Application to mating surface of carrier cover Genuine High Strength Thread Locking Sealant
(Loctite 270 or equivalent) Application i ...
Other materials:
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Inspection
INSPECTION AFTER INSTALLATION
Fuel Leakage Inspection
Check for fuel leakage according to the following procedure.
Turn ignition switch ON (with engine stopped). With fuel pressure applied to fuel piping, check for fuel leakage at the locations where parts are removed and reinstalled.
NOTE:
Use a m ...
Jump starting
To start your Nissan Armada engine using a booster battery, it is essential to
carefully follow the proper procedures and safety precautions outlined below to
avoid damage or injury.
WARNING
Improper jump starting of the Nissan Armada can result in a battery explosion,
causing severe inj ...
0.0055