Nissan Armada 2025-2026 Service and Repair Manual: Inspection
INSPECTION AFTER INSTALLATION
Fuel Leakage Inspection
Check for fuel leakage according to the following procedure.
Turn ignition switch ON (with engine stopped). With fuel pressure applied to fuel piping, check for fuel leakage at the locations where parts are removed and reinstalled.
NOTE:
Use a mirror or other means to check locations that cannot be seen directly.
Start the engine, increase the engine speed, and check again for fuel leakage at the locations where parts are removed and reinstalled.
CAUTION:
Be careful of burns when checking.
Removal and Installation
WARNING:
WARNING:
Be sure to read Refer to PRECAUTION FOR HANDLING HIGH PRESSURE FUEL SYSTEM.when working on the high pressure fuel system.
Put a “CAUTION: FLAMMABLE” sign in the workshop.
REMOVA ...
Other materials:
Diagnosis Procedure
CHECK AUTO ANTI-DAZZLING INSIDE MIRROR POWER SUPPLY AND GROUND CIRCUIT
Check auto anti-dazzling inside mirror power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK AUTO ANTI- ...
Diagnosis Procedure
CHECK DTC OF TRANSFER CONTROL UNIT
With CONSULT
Ignition switch ON.
Perform self-diagnosis for “AWD/4WD”.
Is any DTC detected?
YES >>
Check DTC detected item. Refer to DTC Index.
NO>>
GO TO 2.
CHECK 4WD SHIFT INDICATOR
Check 4WD shift indicator function. Refer to Component Functio ...
Diagnosis Procedure
CHECK SYMPTOM
Check the symptoms.
A stop/start indicator lamp turned on, and did an engine perform a stall at the time of restart from a stop/start system?
YES>>
GO TO 2.
NO>>
Refer to Symptom Table.
CHECK STOP/START PROHIBIT CAUSE
With CONSULT
Select “Stop/Star engine stall cause d ...
0.0063