| Tool name | Description | |
|---|---|---|
| Ball joint remover |
|
|
| Drive shaft puller |
| Removing drive shaft joint sub assembly |
| Sliding hammer |
| Removing drive shaft |
| Power tool |
| Loosening bolts and nuts |
Special Service Tools
Lubricant or/and SealantRemoval and Installation
REMOVAL
Front
Remove front wiper drive assembly. Refer to Removal and Installation.
Remove instrument panel assembly. Refer to Removal and Installation.
Disengage fixing pawls, and then remove front drain connector.
NOTE:
Attach a string to the end of drain connector, for use when performing instal ...
Draining
WARNING:
The ignition switch OFF.
Remove engine under cover. Refer to Exploded View.
Remove drain plug and gasket.
Drain gear oil.
Set a gasket on drain plug and install it to final drive assembly.
CAUTION:
Never reuse gasket.
Tighten drain plug to the specified torque. Refer to Exploded View.
I ...
WATER PUMP : Removal & Installation
WARNING:
CAUTION:
When removing water pump assembly, be careful not to get engine coolant on drive belts.
Water pump cannot be disassembled and should be replaced as a unit.
After installing water pump, connect hose and clamp securely, then check for leakage using the radiator cap tester (commercial ...