Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Front
Remove front wiper drive assembly. Refer to Removal and Installation.
Remove instrument panel assembly. Refer to Removal and Installation.
Disengage fixing pawls, and then remove front drain connector.
NOTE:
Attach a string to the end of drain connector, for use when performing installation procedure.
Remove front drain connector from front drain hose.
Rear
Remove rear bumper fascia. Refer to Removal and Installation.
Remove luggage side lower finisher. Refer to Removal and Installation.
Remove rear A/C unit assembly (For RH side). Refer to Removal and Installation.
Disengage fixing pawls, and then remove rear drain connector.
NOTE:
Attach a string to the end of drain connector, for use when performing installation procedure.
Remove rear drain connector from rear drain hose.
INSTALLATION
Install in the reverse order of removal.
Exploded View
Refer to Exploded View. ...
Other materials:
Adjustment
WARNING:
BALANCING WHEELS (BONDING WEIGHT TYPE)
Preparation Before Adjustment
Using releasing agent, remove double-faced adhesive tape from the road wheel.
CAUTION:
Be careful not to scratch the road wheel during removal.
After removing double-faced adhesive tape, wipe clean traces of releasing agen ...
Securing and Pulling
In principle, the pulling force must be applied in the exact opposite direction of the impact force (input). The securing method must match this pulling direction.
(1) DOWNWARD PULL
Secure as close to the damaged portion as possible. If there is a separation between the pulling point and damaged poi ...
Exploded View
Bank 1 side
Ignition coil Spark plug Rocker cover Rocker cover gasket Blow-by hose 1 (bank 1) Clamp Blow-by hose 2 (bank 1) Intake camshaft position sensor Exhaust camshaft position sensor Crankcase pressure sensor Comply with the installation procedure when tightening. Refer to Removal ...
0.0058