Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the Intelligent Key unit.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the Intelligent Key unit.
Refer to Work Procedure.
NOTE:
For details the network connection and operation, refer to “CONSULT Operation Manual”.
The configuration no need to “save” configuration data from the Intelligent Key unit. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
CAUTION:
-
Complete the procedure of “Configuration” in order.
-
If incorrect “Configuration”, incidents might occur.
-
Never perform “Configuration” except for new Intelligent Key unit.
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to Intelligent Key unit following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
NOTE:
-
Log in the network according to CONSULT guidance.
-
For details the network connection and operation, refer to “CONSULT Operation Manual”.
>>
WORK END
Other materials
NissanConnect Owner's Manual
QR code (U.S. only)
The Nissan Armada NissanConnect Owner’s Manual can be conveniently accessed by
scanning the QR code shown above (U.S. models only) or by using the printed manual
included with your vehicle.
This comprehensive Nissan Armada digital guide provides detailed explanations ...
Precautions
PRECAUTIONS FOR PROCEDURE WITHOUT COWL TOP COVER
When performing the procedure after removing cowl top cover, cover the lower end of windshield with urethane, etc to prevent damage to windshield.
PRECAUTIONS FOR REMOVING BATTERY TERMINAL
When disconnecting the 12V battery terminal, turn off the ...
Thigh Support
Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
CHECK THIGH SUPPORT SENSOR
Check thigh support sensor LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>
Chec ...