Vehicle specification needs to be written with CONSULT because it is not written after replacing the combination meter.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the combination meter.
Refer to Work Procedure.
NOTE:
The configuration no need to “save” configuration data from the combination meter. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
CAUTION:
Complete the procedure of “Configuration” in order.
If incorrect “Configuration”, incidents might occur.
Never perform “Configuration” except for new combination meter.
Work Procedure
Work ProcedureCommercial Service Tools
Tool name Description Engine ear
Locates the noise Suction lifter
Holds the windshield glass, side window glass, and back door window glass Remover tool
Removes clips, pawls, and metal clips ...
Disposal
Set shock absorber horizontally with the piston rod fully extended.
Drill 2 – 3 mm (0.08 – 0.12 in) hole at the position () from top as shown in the figure to release gas gradually.
CAUTION:
Wear eye protection (safety glasses).
Wear gloves.
Be careful with metal chips or oil blown out by the c ...
Seat adjustment using touch screen display
Example
The Nissan Armada offers an advanced and intuitive way to control seat adjustments
through its integrated touch screen display. This system enhances convenience by
allowing the driver to manage multiple seating functions quickly and efficiently
without relying solely on physical c ...