Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to combination meter following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
NOTE:
Log in the network according to CONSULT guidance.
WORK END
Configuration (combination Meter)
Vehicle specification needs to be written with CONSULT because it is not written after replacing the combination meter.
The configuration requires network connection. CONSULT connects to network and t ...
Display
...
Other materials:
Removal and Installation
REMOVAL
Remove instrument panel assembly. Refer to Removal and Installation.
Remove Head Up Display unit mounting bolts .
Disconnect the Head Up Display unit harness connector.
Remove Head Up Display unit .
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Never damage Head U ...
Removal and Installation
WARNING:
REMOVAL
Shift the transmission to the neutral position, and then release the parking brake.
Put matching mark on rear propeller shaft flange yoke and transmission companion flange.
CAUTION:
For matching mark, use paint. Never damage propeller shaft flange and transmission companion flang ...
Removal and Installation
WARNING:
REMOVAL
Remove air breather hose A from transfer assembly.
Remove clip A .
Remove clip B .
Remove A/T air breather hose. Refer to Removal and Installation.
Release clip C and remove air breather hose assembly from bracket.
Separate each component part.
INSTALLATION
Note the follo ...
0.005