CUMULATIVE BATTERY DISCHARGE CURRENT CLEAR is an operation to clear the cumulative value of battery discharge current which is memorized in IPDM E/R. This operation is necessary after replaced the 12V battery. Refer to Work Procedure.
NOTE:
The cumulative battery discharge current value is used for 12V battery inspection.
If the cumulative value is not erased when replacing the battery, the accurate diagnoses cannot be made because it was added to the cumulative value before the battery replacement.
Work Procedure
Work ProcedureExploded View
With ProPILOT ASSIST 2.1
Roof antenna : N·m (kg-m, in-lb)
Without ProPILOT ASSIST 2.1
Roof antenna : N·m (kg-m, in-lb) ...
Special Service Tools
Tool number
(TechMate No.)
Tool name Description ST3127S000
(NI-25765-A)
Preload gauge
Measuring rotating torque of ball joint KV401110S0
( - )
Rear shock absorber service kit
KV40111000
(NI-53363)
Soket 18
KV40111100
(NI-53362)
Rod lock handle
Shock absorber mounting braket
Loosening piston ...
Exploded View
Upper ball seat Steering knuckle Baffle Splash guard Wheel hub and bearing assembly Disc rotor Hub lock nut Hub bolt Cotter pin Lower ball seat : Comply with the installation procedure when tightening. Refer to Removal and Installation. : Vehicle front : N·m (kg-m, in-lb) : N·m (kg- ...