Nissan Armada 2025-2026 Service and Repair Manual: Special Service Tools
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
ST3127S000 (NI-25765-A) Preload gauge |
| Measuring rotating torque of ball joint |
KV401110S0 ( - ) Rear shock absorber service kit
(NI-53363) Soket 18
(NI-53362) Rod lock handle |
| Shock absorber mounting braket
 Holding piston rod |
KV40111100
Preparation
...
Commercial Service Tools
Tool name Description Power tool
Loosening bolts and nuts Spring compressor
Removing and installing coil spring ...
Other materials:
Work Flow
CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any of customer's comments; Refer to Diagnostic Worksheet. This infor ...
Precautions for Harness Repair
Solder the repaired area and wrap tape around the soldered area.
NOTE:
A fray of twisted lines must be within 110 mm (4.33 in).
Bypass connection is never allowed at the repaired area.
NOTE:
Bypass connection may cause CAN communication error. The spliced wire becomes separated and the characteris ...
Work Procedure
PERFORM WASTEGATE VALVE CLOSED POSITION LEARNING VALUE CLEAR
With CONSULT
On the CONSULT screen, select “ECM” >> “Work support” >> “WASTEGATE ACTUATOR POSI LEARN VALUE CLEAR”.
Touch “Start”.
Check that “COMPLETED” is displayed. If “COMPLETED” is not displayed, rep ...
0.005