Work Flow
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:
The customers are not professionals. Never assume that “maybe the customer means···” or “maybe the customer mentioned this symptom”.
>>
GO TO 2.
SELF-DIAGNOSIS WITH CONSULT
With CONSULT
Perform self-diagnosis of “Display unit” using CONSULT. Refer to CONSULT Function.
NOTE:
Skip to step 4 of the diagnosis procedure if “Display unit” is not displayed.
Is any DTC detected?
YES>>GO TO 3.
NO>>GO TO 4.
TROUBLE DIAGNOSIS FOR DTC
-
Check the DTC indicated in the “Self Diagnostic Result”.
-
Perform the relevant diagnosis referring to the DTC Index. Refer to DTC Index.
>>
GO TO 5.
SYMPTOM DIAGNOSIS
Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to Symptom Table.
>>
GO TO 5.
MALFUNCTIONING PART REPAIR
Repair or replace the identified malfunctioning parts.
>>
GO TO 6.
REPAIR CHECK 1
With CONSULT
-
Erases self-diagnosis results.
-
Perform self-diagnosis of “Display unit” again after repairing or replacing the specific items.
-
Check if any DTC is detected in self-diagnosis results of “Display unit” .
Is any DTC detected?
YES>>GO TO 3.
NO>>GO TO 7.
REPAIR CHECK 2
Check that the malfunction symptom is solved or no other symptoms occur.
Is there a malfunction symptom?
YES>>GO TO 4.
NO>>INSPECTION END
Other materials
Steering wheel
Basic information
WARNING
Never attempt to adjust the Nissan Armada steering wheel while the vehicle
is in motion. Doing so may result in loss of control and could lead to a serious
accident.
Do not position the Nissan Armada steering wheel closer than necessary
for safe and comforta ...
System Initialization
Description
Initialization of system should be conducted after the following conditions. Refer to Work Procedure.
When the moonroof motor assembly or sunshade motor assembly is replaced.
When the moonroof or sunshade does not operate normally. (Incomplete initialization conditions)
Work Procedu ...
Propilot Assist 2.1
Propilot Assist 2.1 System Symptoms
Symptom Table
Check whether symptom is due to normal operation before performing diagnosis. Refer to Precautions for ProPILOT Assist 2.1. Symptoms Reference page
ProPILOT Assist 2.1 cannot be turned ON
Diagnosis Procedure
vehicle speed/vehicle-to-vehicle ...