Description
Initialization of system should be conducted after the following conditions. Refer to Work Procedure.
-
When the moonroof motor assembly or sunshade motor assembly is replaced.
-
When the moonroof or sunshade does not operate normally. (Incomplete initialization conditions)
Work Procedure
PERFORM SYSTEM INITIALIZATION
-
Close moonroof and sunshade.
-
Press and hold the moonroof switch CLOSE for approximately 10 seconds.
Moonroof and sunshade will move as following.
Moonroof tilt up, and the sunshade slightly close and stops.
-
Release the moonroof switch, and continue to press the moonroof switch CLOSE again soon.
Moonroof and sunshade will move as following.
Sunshade fully open → moonroof tilt down → moonroof fully open → moonroof fully closed → sunshade fully closed.
-
Release the moonroof switch after moonroof and sunshade stopped.
>>
GO TO 2.
CHECK THE FUNCTION
-
Check that moonroof and sunshade automatically operated normally.
-
Check anti-pinch function. Refer to Description.
>>
END
Other materials
Steering Assist switch
The Steering Assist switch in the Nissan Armada allows the driver to temporarily
enable or disable the Steering Assist function.
Additionally, the system can be controlled through the "Driver Assistance" menu
within the Nissan Armada vehicle information display.
The Nissan Armada ...
System maintenance (ProPILOT Assist 2.1)
To ensure optimal performance of the Nissan Armada ProPILOT Assist 2.1 system,
it is essential to keep the driver monitor area clean and unobstructed at all times.
Carefully remove any dust, dirt, or smudges using a clean, soft cloth such as
a lens-cleaning cloth. Maintaining a clear camera ...
Door Outside Molding
Exploded View
Front door panel
Front door outside molding
Rear door outside molding
Rear door panel
: Pawl
: vehicle front
...