Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis and Repair Work Flow

Basic Inspection

...

Work Flow

OVERALL SEQUENCE DETAILED FLOW GET INFORMATION FOR SYMPTOM Get the detailed information about symptom from customer. Check the drive mode indicator on the meter appeared. Check the drive mode indicat ...

Other materials:

Work Procedure
ADAS CONTROL UNIT 2 CONFIGURATION >> GO TO 2. VIN REGISTRATION Turn ignition switch OFF. Turn ignition switch ON. NOTE: If ignition switch is not turned OFF after setting configuration, ADAS control unit 2 may detect DTC. Perform VIN registration. Refer to Work Procedure. >> GO TO ...

Removal and Installation
REMOVAL Remove driver air bag module. Refer to Removal & Installation. Remove steering wheel. Refer to Removal and Installation. Remove steering column cover upper and lower. Refer to Removal and Installation. Disconnect spiral cable body side harness connectors . Left side : Vehicle front ...

Inspection
INSPECTION AFTER REMOVAL Replace the shims and shim covers if rust is excessively attached. Eliminate rust on the pad and the torque member. Replace them if rust is excessively attached. INSPECTION AFTER INSTALLATION Check a drag of rear disc brake. If any drag is found, follow the procedure descri ...