Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis Procedure
CHECK SYMPTOM
Check the symptoms.
A stop/start indicator lamp turned on, and did an engine perform a stall at the time of restart from a stop/start system?
YES>>GO TO 2.
NO>>Refer to Symptom Table.
CHECK STOP/START PROHIBIT CAUSE
With CONSULT
Select “Stop/Star engine stall cause data recorder” in “Work support” mode of “ENGINE” using CONSULT.
Is the cause of the engine not starting recorded?
YES>>Eliminate the cause and complete the inspection.
NO>>GO TO 3.
CHECK STARTER MOTOR (SUB STARTER & ALTERNATOR) OPERATION
Check the stater motor (sub starter & alternator *if equiped ) operation when engine restart during stop/start system operation.
Is the starter motor operated?
YES>>Refer to Symptom Table.
NO>>Perform “All DTC Reading” with CONSULT and perform trouble diagnosis for DTC indicated.
Other materials:
Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect front camera unit harness connectors .
Remove mounting bolts , and remove front camera unit .
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not touch or shock the front camer ...
Work Flow
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
NOTE:
>>
GO TO 2.
SELF-DIAGNOSIS WITH CONSULT
With CONSULT
Perform self-diagnosis of “Display unit” using CONSULT. Refer to CONSULT Function.
NOTE:
Skip to step 4 of the diagnosis procedure if “Display unit” is not displayed.
Is any DTC detect ...
Brake Pedal
Unit: mm (in)
Item Standard Brake pedal height 157.9 – 167.9 (6.22 – 6.61) Depressed brake pedal height
[Depressing 490 N (50 kg, 110 lb) while engine ON] 145.0 (5.71) or more Clearance between stop lamp switch mounting bracket and the brake pedal lever 14.0 – 18.0 (0.55 – 0.71) Brak ...
0.005