RADIATOR : Service Data
PrecautionWork Procedure
Perform the following procedures after replacing the sonar control unit.
REPLACE SONAR CONTROL UNIT
Replace sonar control unit. Refer to SONAR CONTROL UNIT : Removal & Installation.
>>
GO TO 2.
PERFORM CONFIGURATION
With CONSULT
Perform "Replace ECU". Refer to Description.
>>
GO ...
Hammering
Elongation of aluminum alloy during hammering will be greater than with steel plates. Therefore, a wooden or plastic hammer should be used with a softer blow to prevent stretching and work hardening of panels. Observe the following in case body filler is applied after hammering.
Apply wash primer a ...
Determining Various Conditions of the Collision
Size, shape, position, rigidity, etc. of the other vehicle involved in the collision
Speed of both vehicles at the time of collision
Collision angle and direction
Number of occupants and their positions at the time of collision
Size, shape, hardness, etc. of load in the vehicle
History of damaged po ...