Automatic brake hold function does not operate when the operating conditions are satisfied.
PERFORM SELF-DIAGNOSIS (CHASSIS CONTROL MODULE)
With CONSULT
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK AUTOMATIC BRAKE HOLD SWITCH
Check the automatic brake hold switch. Refer to Component Inspection.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace the parking brake switch (automatic brake hold switch). Refer to Removal and Installation.
PERFORM SELF-DIAGNOSIS [ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)]
With CONSULT
Perform self-diagnosis for “ABS”.
Is DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>Replace the chassis control module. Refer to Removal and Installation.
Does Not OperateInner Rear Wheelhouse
WARNING:
WITH DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION MODELS
Work after rear fender, outer rear sill reinforcement, and outer rear wheelhouse are removed.
: Vehicle front
: Weld the parts onto the back of the component part. Replacement part • Inner rear wheelhouse
Unit: mm ...
FRONT BRAKE CALIPER ASSEMBLY : Disassembly & Assembly
DISASSEMBLY
CAUTION:
Never drop parts.
NOTE:
When disassembling, torque member, brake pad, and pad retainer are not required to remove. Refer to Removal and Installation.
Remove sliding pin bolts and then remove cylinder body from torque member.
CAUTION:
Never drop brake pad by fixing it with suita ...
BSW system operation
Side indicator light
BSW indicator (vehicle information display)
Vehicle information display
Steering-wheel-mounted controls (right side)
The Nissan Armada BSW system becomes active at speeds above approximately 20
MPH (32 km/h), ensuring effective operation during typical driving ...