Chevrolet Sonic manuals

Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis Procedure

NOTE:

CHECK REAR HEATER HOSE

Check installation of rear heater hose by visually or touching.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace parts depending on the inspection results.

CHECK REAR HEATER CORE

  1. Check temperature of inlet hose and outlet hose of rear heater core.

  2. Check that inlet side of rear heater core is hot and the outlet side is slightly lower than/almost equal to the inlet side.

    CAUTION:

    Always perform the temperature inspection in a short period of time because the engine coolant temperature is very hot.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Replace rear heater core. Refer to Removal and Installation.

CHECK AIR LEAKAGE FROM EACH DUCT

Check duct and nozzle, etc. of the rear air conditioning system for air leakage.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace parts depending on the inspection results.

CHECK SUNLOAD SENSOR

Perform sunload sensor diagnosis. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace A/C auto amp. Refer to Removal and Installation.

Rear Air Conditioner
Symptom Insufficient heating No warm air comes out. (Air flow volume is normal.) ...

Compressor Does Not Operate
SYMPTOM Compressor does not operate. ...

Other materials:

Additional Service When Replacing Ecm
Performing the following procedure can automatically activate recommunication of ECM and Intelligent Key unit, but only when the ECM is replaced with a new one*. For details, refer to Work Procedure. *: New one means a virgin ECM that has never been energized on-board. (In this step, initialization ...

System Setting
The settings of the automatic driving positioner system can be changed, using information display in the combination meter and the set switch. Always check the settings before and after replacing driver seat control unit. For details, refer to Work Procedure. ×: Applicable Setting Change Item Con ...

Special Service Tools
Tool number (TechMate No.) Tool name Description ST3127S000 (NI-25765-A) Preload gauge Measuring rotating torque of ball joint KV401110S0 ( - ) Rear shock absorber service kit KV40111000 (NI-53363) Soket 18 KV40111100 (NI-53362) Rod lock handle Shock absorber mounting braket Loosening piston ...

© 2014-2026 Copyright www.niarmada.com
 
0.0052