Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis Procedure
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT
Check that DTC is not detected with automatic back door control unit.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Refer to DTC Index.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK OPEN SWITCH
Check open switch.
Refer to DTC Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
CHECK CLOSE SWITCH
Check close switch.
Refer to DTC Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Repair or replace the malfunctioning parts.
CHECK HALF LATCH SWITCH
Check half latch switch.
Refer to DTC Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 6.
NO>>Repair or replace the malfunctioning parts.
CHECK BACK DOOR CLOSURE MOTOR
Check back door closure motor.
Refer to DTC Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 7.
NO>>Repair or replace the malfunctioning parts.
REPLACE BACK DOOR LOCK ASSEMBLY
Replace back door lock assembly.
Confirm the operation after replacement.
Is the result normal?
YES>>INSPECTION END
NO>>GO TO 8.
REPLACE AUTOMATIC BACK DOOR CONTROL UNIT
Replace automatic back door control unit. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Automatic Back Door Control Unit
Back door does not opened using back door opener switch. ...
Back Door Auto Closure Control Unit
Back door does not opened using back door opener switch. ...
Other materials:
Work Procedure
Description
When replace each camera, it is necessary to write the camera parameters using CONSULT.
Write to around view monitor control unit according to "Parameter writing" procedure of "CONSULT Operation Manual".
Work Procedure
PARAMETER WRITING
CONSULT
Ignition switch ON.
Select "Parameter writi ...
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
NOTE:
>>
GO TO 2.
SELF-DIAGNOSIS WITH CONSULT
With CONSULT
Perform self-diagnosis of “Wireless charger” using CONSULT. Refer to CONSULT Function.
NOTE:
Skip to step 4 of the diagnosis procedure if “Wireless charger” is not di ...
Removal and Installation
WARNING:
Before servicing, disconnect ground line of battery. Refer to Precautions for Removing Battery Terminal.
Prevent accidental activation. Refer to Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER".
REMOVAL
Seat Belt Pre-tensioner Retractor (LH and RH) ...
0.006