CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace power window main switch. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Removal and Installation
REMOVAL
Without Dynamic Digital Suspension and Electronic Air Suspension
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Set suitable jack under lower link.
CAUTION:
Never damage lower link.
Remove brake hose bracket from steering knuckle. Refer to Removal and Installation.
Sep ...
Removal and Installation
WARNING:
REMOVAL
Put matching mark on rear propeller shaft flange yoke and final drive companion flange.
CAUTION:
Remove propeller shaft assembly fixing bolts and nuts.
Remove propeller shaft assembly from vehicle.
CAUTION:
Never damage rear oil seal of transfer.
Perform inspection after removal ...