REPLACE TRAILER BRAKE CONTROL UNIT
Replace trailer brake control unit. Refer to Removal and Installation.
>>INSPECTION END
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Brake Pedal
Unit: mm (in)
Item Standard Brake pedal height 157.9 – 167.9 (6.22 – 6.61) Depressed brake pedal height
[Depressing 490 N (50 kg, 110 lb) while engine ON] 145.0 (5.71) or more Clearance between stop lamp switch mounting bracket and the brake pedal lever 14.0 – 18.0 (0.55 – 0.71) Brak ...
Removal and Installation
WARNING:
REMOVAL
WARNING:
CAUTION:
Release the parking brake.
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Disconnect the parking brake actuator harness connector .
Remove sliding pin bolts .
Remove the cylinder body , and suspend the cylinder body with suitable wire so t ...