CHECK HEAD UP DISPLAY POSITION ADJUSTMENT SIGNAL
With CONSULT
Select "Data Monitor" mode of "Head Up Display” using CONSULT.
Check "Display up and down status" and "Display rotation status" indication as per the following condition.
| Monitor item | Condition | Indication |
|---|---|---|
| Display up and down status | Press each position adjustment on the combination meter setting screen. | The display changes to (-10) - (10) |
| Display rotation status | The display changes to (-10) - (10) |
Refer to Switch Name and Function.
Is the inspection result normal?
YES>>Replace Head Up Display unit. Refer to Removal and Installation.
NO>>Check Combination meter self diagnosis result. Refer to DTC Index.
Hydraulic Layout
Rear washer tube B Rear washer nozzle Rear washer nozzle tube Rear washer tube C Rear washer tube A Washer tank assembly : Clip ...
Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
CHECK MIRROR SENSOR
Check mirror sensor.
Door mirror LH: Refer to Component Function Check.
Door mirror RH: Refer to Component Function Check.
Is the inspection r ...
EXHAUST SYSTEM : Removal & Installation
WARNING:
REMOVAL
Remove spare tire. Refer to Removal & Installation.
Remove rear muffler with the following procedure: Loosen the mounting nut of the mounting bracket .
CAUTION:
Be careful not to hit the rear muffler with the tool.
Remove mounting rubber 1 and rear muffler from the vehicle ...