Chevrolet Sonic manuals

Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis Procedure

Possible cause Inspection item Reference page
Not driving highway or motorway Explain to customer that steering assist operation display does not turn blue when not driving on highway or a motorway with HD map after checking the driving situation Diagnosis Procedure
Driving vehicle speed is out of operating conditions Vehicle driving speed exceeds speed limit of road Explain to customer that steering assist operation display does not turn blue when vehicle driving speed exceeds speed limit of road Diagnosis Procedure
Driving on the road with speed limit 60 km/h (37 MPH) or less Explain to customer that lane change support function is not operated while driving on the road with 60 km/h (37 MPH) or less as speed limit System Description
Detecting that the driver is not looking forward Drive does not look forward Explain to customer that steering assist operation display does not turn blue when drive does not look forward Diagnosis Procedure
Misidentification of driver monitor camera After checking that symptom is under normal operation, explain to customer that driver monitor camera may not identify correctly depending on the situation Precautions for ProPILOT Assist 2.1
HD map data related Driving on the road where HD map data is not maintained After checking the driving route, explain to customer that steering assist operation display does not turn blue on the road where HD map data is not maintained System Description
Driving near sharp curve, tollhouse, exit, road split, junction, lane reduction sections After checking the driving situations, explain to customer that steering assist operation display does not turn blue on the road near sharp curve, tollhouse, exit, road split, junction, lane reduction sections System Description
Driving on a road without a median strip After checking the driving situations, explain to customer that steering assist operation display does not turn blue on the road where there is no median strip System Description
Not receiving GNSS signal After checking the driving situations, explain to customer that steering assist operation display does not turn blue when GNSS signal cannot be received System Description
Wiper is operated with low speed After checking the driving situations, explain to customer that steering assist operation display does not turn blue when wiper is operated with low speed System Description
Depressing accelerator pedal After checking the driving situations, explain to customer that steering assist operation display does not turn blue when depressing accelerator pedal System Description
Warning is operated Approach warning sounds After checking the driving situations, explain to customer that steering assist operation display does not turn blue when approach warning sounds System Description
Lane departure warning sounds After checking the driving situations, explain to customer that steering assist operation display does not turn blue when LDW/I-LI sounds System Description
12 V system components are operated under overload condition
  • Check with customer that A/C, wiper, headlights, power socket, etc. are not overloaded.

  • Explain that steering assist operation display does not turn blue in the above state

-
Propilot Assist 2.1 Display Does Not Turn Blue
...

Propilot Assist 2.1 Display Changes from Blue to Green
...

Other materials:

Work Procedure
Always perform the side radar configuration after replacing the side radar. SIDE RADAR CONFIGURATION >> GO TO 2. SIDE RADAR ALIGNMENT Perform the side radar alignment with CONSULT. Refer to Work Procedure. >> GO TO 3. PERFORM SELF-DIAGNOSIS Perform the self-diagnosis of side radar w ...

Rear Floor Rear
WARNING: WITH ProPILOT Assist 2.1 MODELS Work after rear end crossmember is removed. : Vehicle front : Drill φ6 mm (0.24 in) hole for the plug welding hole (ultra high strength steel). : Drill φ7 mm (0.28 in) hole for the plug welding hole (ultra high strength steel). : Weld the parts onto the ba ...

PRECAUTIONS FOR POP UP ENGINE HOOD : Precautions
WARNING: Always observe the following items for preventing accidental activation. Before removal or installation of the pop-up engine hood and harness, always OFF the ignition switch, disconnect the battery negative terminal, and wait for 3 minutes or more. (To discharge the accumulated electricity ...

© 2014-2026 Copyright www.niarmada.com
 
0.142