Nissan Armada 2025-2026 Service and Repair Manual: Disassembly and Assembly
DISASSEMBLY
CAUTION:
When fixing shock absorber with a vise, wrap a shop cloth around lower side of shock absorber to protect from damage. Never set the cylindrical part of shock absorber with a vise.
When removing the shock absorber mounting bracket, use the rear shock absorber service kit [SST: KV401110S0 ( ― ) ] to hold the shock absorber rod. A: Soket 18 :[SST: KV40111000(NI-53363)] B: Rod lock handle :[SST: KV40111100(NI-53362)]
ASSEMBLY
CAUTION:
When fixing shock absorber with a vise, wrap a shop cloth around lower side of shock absorber to protect from damage. Never set the cylindrical part of shock absorber with a vise.
When assembling dust cover, bound bumper, and shock absorber mounting bracket, follow the procedure below.
Install bound bumper
to dust cover 
.
Install dust cover
and bound bumper to shock absorber mounting bracket 
.
Install shock absorber to bound bumper, dust cover, and shock absorber mounting bracket.
NOTE:Check that part
of dust cover is attached to shock absorber .
When installing the shock absorber mounting bracket, use the rear shock absorber service kit [SST: KV401110S0 ( ― ) ] to hold the shock absorber rod. A: Soket 18 :[SST: KV40111000(NI-53363)] B: Rod lock handle :[SST: KV40111100(NI-53362)]
CAUTION:
Never reuse piston rod lock nut.
Removal and Installation
REMOVAL
Without Dynamic Digital Suspension and Electronic Air Suspension
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Remove cylinder body. Hang cylinder body in a place where ...
Inspection
INSPECTION AFTER REMOVAL
Check the following items, and replace the parts if necessary.
Shock absorber assembly for deformation, cracks, damage.
Piston rod on shock absorber assembly for damage, uneve ...
Other materials:
Removal and Installation
REMOVAL
Apply protective tape (A) on the part to protect it from damage.
Disengage fixing pawls using remover tool (A), and then remove roof rail cover front and roof rail cover rear .
CAUTION:
Use a remover tool wrapped in tape (B).
: Pawl
Disengage fixing clips and metal clips, and then re ...
Exploded View
Windshield molding Dam sealant rubber upper Clip Insulator Dam sealant rubber Spacer Windshield glass Roof panel Adhesive Painted surface primer Glass primer Body side outer panel Dash panel : Bracket : Inside mirror base : Edge : R end : Always replace after every disassembly.
...
Diagnosis Procedure
CHECK LOG-IN FUNCTION
Check log-in function. Refer to System Description.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to Work Flow.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check door lock/unlock using Intelligent Key button operation.
Does door lock/unlock with Intelligent K ...
0.0065