Nissan Armada 2025-2026 Service and Repair Manual: Inspection
INSPECTION AFTER REMOVAL
Check the following items, and replace the parts if necessary.
Shock absorber assembly for deformation, cracks, damage.
Piston rod on shock absorber assembly for damage, uneven wear, and distortion.
Welded and sealed areas for oil leakage.
INSPECTION AFTER INSTALLATION
Without Dynamic Digital Suspension and Electronic Air Suspension
Check wheel alignment. Refer to Inspection.
With Dynamic Digital Suspension and Electronic Air Suspension
Confirm to close the hood.
Always check for the air leakage with soapy water.
Check wheel alignment. Refer to Inspection.
Disassembly and Assembly
DISASSEMBLY
CAUTION:
When fixing shock absorber with a vise, wrap a shop cloth around lower side of shock absorber to protect from damage. Never set the cylindrical part of shock absorber with a vise. ...
Disposal
Set shock absorber horizontally with the piston rod fully extended.
Drill 2 – 3 mm (0.08 – 0.12 in) hole at the position () from top as shown in the figure to release gas gradually.
CAUTION:
Wear ...
Other materials:
Adjustment
WARNING:
Recommended fluid and fluid capacity : Refer to Fluids and Lubricants.
CAUTION:
Use only recommended A/T fluid. Never mix with other A/T fluid.
Always maintain the A/T fluid temperature within between 45°C (113°F) and 55°C (131°F) while checking with CONSULT when the A/T fluid level ...
Exploded View
IPDM E/R cover A IPDM E/R IPDM E/R cover B IPDM E/R cover C IPDM E/R cover D IPDM E/R cover E IPDM E/R cover bracket : Pawl ...
Diagnosis Procedure
CHECK AUTO ANTI-DAZZLING INSIDE MIRROR POWER SUPPLY AND GROUND CIRCUIT
Check auto anti-dazzling inside mirror power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK AUTO ANTI- ...
0.008