Nissan Armada 2025-2026 Service and Repair Manual: Disassembly and Assembly
DISASSEMBLY
Remove rear door regulator assembly. Refer to Removal and Installation.
Remove rear door power window motor mounting bolts, and then remove rear door power window motor.
ASSEMBLY
Note the following item, and then assemble in the reverse order of disassembly.
CAUTION:
After assembly, perform the inspection and adjustment. Refer to Inspection and Adjustment.
Removal and Installation
REMOVAL
CAUTION:
Never damage rear door glass and rear door panel.
Remove rear door glass. Refer to Removal and Installation.
Disengage fixing portion using a remover tool (A) according to numerical o ...
Inspection and Adjustment
SYSTEM INITIALIZATION
Perform additional service for operating the power window control system normally after installing rear door regulator assembly. Refer to Work Procedure.
FITTING INSPECTION
Chec ...
Other materials:
Roof Rail
Work after roof is removed.
: Vehicle front : Drill φ8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel). : Drill φ11 mm (0.43 in) hole for the plug welding hole (ultra high strength steel). : Weld the parts onto the back of the component part. : Welding method, the number o ...
Exploded View
IR sensor assembly Headlining assembly IR sensor finisher: Pawl : Vehicle front ...
Diagnosis Procedure
PERFORM ECM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ECM”.
Is any DTC detected?
YES >>
Check DTC detected item. Refer to DTC Index.
NO>>
GO TO 2.
PERFORM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for "AWD/4WD".
Is any DTC detected?
YES>>
Check the DTC ...
0.0049