Work Procedure
Work ProcedureDiagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning part.
CHECK HIGH BEAM REQUEST SIGNAL
With CONSULT
Select “High beam request” in “Data Monitor” mode of ...
Disassembly and Assembly
DISASSEMBLY
Remove inside and outside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disengage seatback board fixing retainer .
With 4way power seat system
With 8way power seat system
Disengage seat cushion trim fixing retainers .
With 4way power seat system
With 8way power se ...
Symptom Table
The diagnostics item numbers show the sequence for inspection. Inspect in order from item 1.
Perform diagnoses of symptom table 1 before symptom table 2.
SYMPTOM TABLE 1
Diagnostic item Reference Symptom Poor performance Driving performance Strange noise Shift point is high in “D” positi ...