WARNING:
IN CASE REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
Regarding brake fluid draining, refer to Work Procedure.
IN CASE NOT REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
CAUTION:
The ignition switch OFF and disconnect the ABS actuator and electric unit (control unit) harness connector or the battery negative terminal before performing work.
Connect a vinyl tube to the bleed valve.

Depress the brake pedal and loosen the bleeder valve to gradually discharge brake fluid.
Inspection
RefillingExploded View
Radiator air guide upper Radiator core support Radiator air guide RH Radiator air guide lower Radiator air guide LH : N·m (kg-m, ft-lb) ...
Inspection
INSPECTION AFTER REMOVAL
Appearance
Propeller Shaft Runout
Propeller shaft runout : Refer to Propeller Shaft Tube.
Propeller shaft runout measuring point (Point “”).
: Vehicle front
Dimension A : 130 – 150 mm (5.12 – 5.91 in) B : 150 – 180 mm (5.91 – 7.09 in) C : 734.0 m ...
Maintenance precautions
When performing inspection or maintenance tasks on your Nissan Armada, always
take appropriate precautions to prevent injury and avoid damaging the vehicle.
The following safety guidelines should always be observed when working on your
Nissan Armada:
WARNING
Park the Nissan Armada on a lev ...