Nissan Armada 2025-2026 Service and Repair Manual: Inspection
INSPECTION AFTER REMOVAL
Appearance
Propeller Shaft Runout
| Propeller shaft runout | : Refer to Propeller Shaft Tube. |
Propeller shaft runout measuring point (Point “
”).
: Vehicle front Dimension A : 130 – 150 mm (5.12 – 5.91 in) B : 150 – 180 mm (5.91 – 7.09 in) C : 734.0 mm (28.90 in)
Journal Axial Play
| Journal axial play | : Refer to Journal. |
Joint Flex Torque
| Joint flex torque | : Refer to Journal. |
INSPECTION AFTER INSTALLATION
Disassembly and Assembly
DISASSEMBLY
Put a matching mark between propeller shaft and flange yoke as shown.
CAUTION:
For matching mark, use paint. Never damage the surface.
Remove snap rings .
Lightly tap bottom of yoke us ...
Other materials:
Charge Refrigerant
WARNING:
Always use HFO-1234yf for A/C refrigerant. If CFC-12 or HFC-134a is accidentally charged, A/C compressor is damaged due to insufficient lubrication.
Always observe and follow precautions described on refrigerant container. Incorrect handling may result in an explosion of refrigerant contain ...
Inspection and Adjustment
WARNING:
INSPECTION
Appearance
Refer to Removal and Installation
Runout
Check the wheel bearing axial end play.
Refer to Inspection
Runout (with it attached to the vehicle) : Refer to Rear Disc Brake.
CAUTION:
Refer to Removal and Installation
Wear thickness : Refer to Rear Disc Brake.
T ...
Removal and Installation
REMOVAL
Remove the following parts:
VTC. Refer to Removal & Installation.
Front cover. Refer to Removal & Installation.
Timing chain. Refer to Removal and Installation.
Oil pan (lower). Refer to Removal and Installation.
Oil pan (upper). Refer to Disassembly and Assembly.
Remove oil strain ...
0.0071