WARNING:
The ignition switch OFF.
Remove drain plug
and gasket.

Drain gear oil.
Set a gasket on drain plug and install it to final drive assembly.
CAUTION:
Never reuse gasket.
Tighten drain plug to the specified torque. Refer to Exploded View.
Inspection
RefillingRemoval and Installation
REMOVAL
Remove rear floor carpet. Refer to Removal & Installation.
Disconnect inside key antenna (luggage room) harness connector.
Remove inside key antenna (luggage room) fixing nuts , and then remove inside key antenna (luggage room carpet) .
INSTALLATION
Install in the reverse order of remo ...
Removal and Installation
REMOVAL
CAUTION:
Remove front grille. Refer to the following.
Off road models: Removal and Installation
City models: Removal and Installation
Remove front bumper fascia. Refer to the following.
Off road models: Removal and Installation
City models: Removal and Installation
Remove radiator air gu ...
Calibration of Yaw Rate Sensor
CAUTION:
Always perform the yaw rate sensor calibration before driving when the following operation is performed. Refer to Work Procedure.
×: Required —: Not required
Procedure Yaw rate sensor calibration Removing/ installing ABS actuator and electric unit (control unit) × Replacing ABS act ...