Exploded View
 |
Bracket |  |
Electric intake valve timing control module | ||
| : vehicle front | |||||
 |
: N·m (kg-m, in-lb) | ||||
Removal & Installation
REMOVAL
Remove air cleaner body. Refer to Removal and Installation.
Remove harness clip to bracket.
Disconnect electric intake valve timing control module harness connector. HARNESS CONNECTOR (LEVER LOCKING TYPE) in Refer to Harness Connector.
Remove electric intake valve timing control module mounting nuts ( 
) and remove electric intake valve timing control module from the bracket.
Remove bracket mounting nuts ( ) and remove the bracket ①.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Perform ELECTRIC IVT CONTROL ACTUATOR POSITION LEARNING. Refer to Work Procedure.
Other materials
Sun visors
To reduce glare from the front, pull down the main Nissan Armada sun visor
1.
To block sunlight from the side, detach the sun visor from the center mount
and rotate it sideways 2.
Extend or retract the Nissan Armada sun visor extension 3 as needed for
additional coverage.
CAUT ...
How to enable/disable the I-DA system
Vehicle information display
Steering-wheel-mounted control (right side)
To enable or disable the Intelligent Driver Alertness system in the Nissan Armada,
follow these steps:
1. Press the
button until "Settings" appears in the vehicle information display, then confirm
...
Rear Final Drive: R240 Tools and Preparation
Preparation
Special Service Tools
The actual shapes of the TechMate tools may differ from those of the special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
KV10122000
(NI-53383)
Side oil seal puller
Removing side oil seal
KV10123000
(NI-53384)
Side oil ...