NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Fuel Pump Control Module (fpcm)

Nissan Armada 2025-2026 Service and Repair Manual / Engine / Engine Control System. Vr35ddtt / Fuel Pump Control Module (fpcm)

Exploded View

Fuel pump control module Bracket    
: N·m (kg-m, in-lb)

Removal & Installation

REMOVAL

  1. Remove the luggage side finisher LH. Refer to Exploded View.

  2. Disconnect fuel pump control module (FPCM) harness connector and remove the FPCM from the vehicle.

  3. Remove bracket from fuel pump control module (FPCM).

INSTALLATION

Install in the reverse order of removal.

  • Install bracket to fuel pump control module (FPCM) , and install mounting screws .

    CAUTION:

    Arrow mark should face the fuel pump control module (FPCM) connector.

    Other materials

    Intelligent Around View Monitor system operation
    The Nissan Armada Intelligent Around View Monitor utilizes multiple strategically positioned cameras 1, including units mounted in the front grille, beneath the outside mirrors, and above the rear license plate, to create a comprehensive multi-angle view of the vehicle surroundings. Basic ...

    Radiator Core Seal
    Removal and Installation REMOVALApply protective tape (A) on the part to protect it from damage. Disengage radiator core seal fixing clips using a remover tool (A), and then remove radiator core seal . : Clip INSTALLATIONInstall in the reverse order of removal. ...

    Auto Retractable Door Mirror Does Not Operate
    Diagnosis Procedure CHECK AUTO RETRACTABLE DOOR MIRROR SYSTEM OPERATION Set the auto retractable door mirror to be operable with the combination meter. Check operation of auto retractable door mirror system. Is the inspection result normal? YES>> INSPECTION END NO>> GO TO 2. CHEC ...