Description
The power steering warning lamp does not illuminate when the ignition switch is ON (lamp check).
Diagnosis Procedure
CHECK THE POWER STEERING WARNING LAMP
Perform trouble diagnosis for the power steering warning lamp system. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check that the terminals and the connection of each connector are normal.
NO>>Repair/replace harness, connector, terminal, fusible link or fuse.
Other materials
Engine Lubrication System Service Data and Specifications
ENGINE OIL
ENGINE OIL CAPACITY (APPROXIMATE)Unit: (US qt, lmp qt) Drain and refill
With oil filter change
6.0 (6-3/8, 5-2/8)
Without oil filter change
5.6 (5-7/8, 4-7/8)
Dry engine (Overhaul)
7.2 (7-5/8, 6-3/8)
Engine Oil Pressure
Unit: kPa (kg/cm2, psi)
Engine speed
Approximate ...
Sunshade Motor Assembly
Exploded View
Refer to Exploded View.
Removal and Installation
REMOVALCAUTION:
Before removing sunshade motor, check that sunshade is fully opened.
After removing sunshade motor, never attempt to rotate sunshade motor assembly as a single unit.
Remove headlining to make work space. Refer to Rem ...
Simplified Confirmation by Birds-Eye View Screen
Work Procedure
If the front grille upper is removed or replaced, perform the simplified confirmation by birds-eye view screen.CAUTION:
This procedure should only be performed if the front grille upper has been removed or replaced.
Perform camera calibration when removing or replacing each camera ...