Engine does not start when push-button ignition switch is pressed.
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
| Door lock operation (remote keyless entry) | Door lock operation (request switch of front/rear door) or trunk/back door open operation (opener switch of trunk/back door panel) | Engine started with push-button ignition switch operation (registered Intelligent Key is within the detection area of inside key antenna) | Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch) | Unlock operation when approaching the vehicle, lock operation when away from the vehicle (registered Intelligent Key is within the detection area of outside key antenna) |
|---|---|---|---|---|
| OK | OK | No start | No start | OK |
DIAGNOSIS PROCEDURE
Refer to Diagnosis Procedure.
Diagnosis Procedure
Diagnosis ProcedureCommercial Service Tool
Tool name
Description Power tool
Loosening bolts and nuts Transmission jack
Removing transmission assembly Support bar
Removing transmission assembly 1/2" Disconnect tool
Removing A/T fluid cooler hoses
*: Always check with the Parts Department for the latest parts information. ...
ECM : Removal & Installation
CAUTION:
Perform ADDITIONAL SERVICE WHEN REPLACING ECM. Refer to Work Procedure.
REMOVAL
With ProPILOT Assist 2.1
Disconnect the ECM harness connectors.
Remove ECM mounting nuts ( ) and remove ECM from the bracket.
Remove bracket mounting nuts ( ) and remove the bracket .
Without ProPILOT Ass ...
Exploded View
Oil pan (upper) O-ring 1 Engine oil pressure control solenoid valve O-ring 2 Engine oil level sensor O-ring 3 Oil level gauge guide O-ring 4 Oil level gauge Comply with the installation procedure when tightening. Refer to Disassembly and Assembly. : N·m (kg-m, ft-lb) : N·m (kg-m, in-l ...