WARNING:
Check exhaust pipes, muffler and mounting for improper attachment, leakage, cracks, damage or deterioration.

If damage is found, repair or replace damaged parts.
Exhaust SystemRemoval and Installation
REMOVAL
Remove rear bumper fascia assembly. Refer to Removal and Installation.
Remove rear reflex reflector fixing screws .
Disengage rear reflex reflector fixing pawls, and then remove rear reflex reflector.
: Pawl
INSTALLATION
Install in the reverse order of removal. ...
Work Procedure
WRITING THE REQUIRED INFORMATION FOR CONTROL UNIT REPLACEMENT
With CONSULT
Ignition switch ON.
Select "AWD/4WD".
Select "Replace ECU".
Perform the work according to the procedure displayed in CONSULT.
CAUTION:
The following conditions must be maintained during ECU modernization procedure.
Ignition s ...
Unit Removal & Installation
WARNING:
WARNING:
Situate the vehicle on a flat and solid surface.
Place chocks at the front and back of rear wheels.
For engines not equipped with engine slingers, attach proper slingers and bolts described in PARTS CATALOG.
CAUTION:
Always be careful to work safely, and avoid forceful or uninstru ...