REMOVAL
Remove rear bumper fascia assembly. Refer to Removal and Installation.
Remove rear reflex reflector fixing screws
.

Disengage rear reflex reflector fixing pawls, and then remove rear reflex reflector.

![]() | : Pawl |
INSTALLATION
Install in the reverse order of removal.
Exploded ViewRemoval and Installation
REMOVAL
Remove front center console rear finisher assembly. Refer to Removal and Installation.
Press the USB power socket fixing pawl from the back of the front center console rear finisher assembly to remove the USB power socket.
: Pawl
INSTALLATION
Note the following, and install in the rever ...
Removal and Installation
WARNING:
REMOVAL
Turn the ignition switch ON.
CAUTION:
Never start the engine.
Release the parking brake.
CAUTION:
If the brake cannot be released, release it manually. Refer to Diagnosis Procedure.
Turn the ignition switch OFF.
Disconnect 12V battery negative terminal. Refer to Removal and Instal ...
Diagnosis Procedure
Brake stopping distance is long when ABS function is operated.
CAUTION:
Brake stopping distance on slippery road like rough road, gravel road, or snowy road may become longer when ABS is operated than when ABS is not operated.
CHECK 12V BATTERY
Ignition switch OFF and disconnect CONSULT from data li ...