
![]() | Idler pulley | ![]() | Alternator | ![]() | Drive belt auto-tensioner |
![]() | Crankshaft pulley | ![]() | A/C compressor | ![]() | Water pump |
![]() | Drive belt | ![]() | A/C compressor belt | ||
![]() | View | ![]() | Indicator | ![]() | Range when new drive belt is installed |
![]() | Possible use range | ||||
![]() | Always replace after every disassembly. |
Drive Belt
Removal & InstallationRemoval & Installation
REMOVAL
CAUTION:
Before replacing TCU, perform “ADDITIONAL SERVICE WHEN REPLACING TCU". For details, refer to Work Procedure.
Remove the glove box assembly. Refer to Removal and Installation.
Behind of glove box (View from below) TCU : Pawl
Disconnect the TCU harness connectors.
Press the p ...
Removal and Installation
CAUTION:
Always work with a helper.
REMOVAL
Tilt glass lid up.
Disengage side trim from glass lid.
Remove glass lid fixing screws .
Remove glass lid from vehicle.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
After installing the glass lid, per ...
Basic information
WARNING
Failure to properly follow all warnings and operating instructions for the
Rear Automatic Braking (RAB) system in the Nissan Armada may result in serious injury
or even fatal accidents.
The Nissan Armada RAB system is designed as a supplemental driver assistance
feature and shoul ...