Nissan Armada 2025-2026 Service and Repair Manual: Exploded View

Drive Plate

...

Removal and Installation

REMOVAL Remove A/T assembly from the vehicle. Refer to following : 2WD models: Refer to Removal and Installation. 4WD models: Refer to Removal and Installation. Remove the drive plate using the foll ...

Other materials:

REAR VIEW CAMERA : Adjustment
With 6 Speaker Models Adjust the guide line position if the guide line position is shifted after installing the rear view camera. Draw lines on rearward area of the vehicle passing through the following points: 120 mm (4.72 in) from both sides of the vehicle, and 0.5 m (1.64 ft), 1.0 m (3.28 ft) fro ...

Precaution for Seat Belt Service
CAUTION: Before removing the seat belt assembly, turn the ignition switch OFF, disconnect the battery negative terminal and wait at least 3 minutes. Never use electrical test equipment for seat belt connectors. After replacing or reinstalling seat belt assembly, or reconnecting seat belt connectors, ...

Inspection
INSPECTION AFTER INSTALLATION Check for Fuel Leakage Turn ignition switch “ON” (with the engine stopped). With fuel pressure applied to fuel piping, check that there is no fuel leakage at connection points. NOTE: Use mirrors for checking at points out of clear sight. Start the engine. With engi ...