Nissan Armada 2025-2026 Service and Repair Manual: Inspection
INSPECTION AFTER INSTALLATION
Check for Fuel Leakage
Turn ignition switch “ON” (with the engine stopped). With fuel pressure applied to fuel piping, check that there is no fuel leakage at connection points.
NOTE:
Use mirrors for checking at points out of clear sight.
Start the engine. With engine speed increased, check again that there is no fuel leakage at connection points.
CAUTION:
Never touch the engine immediately after it is stopped because the engine is extremely hot.
Removal & Installation
WARNING:
REMOVAL
WARNING:
Be sure to read Refer to PRECAUTION FOR HANDLING HIGH PRESSURE FUEL SYSTEM. when working on the high pressure fuel system.
Put a “CAUTION: FLAMMABLE” sign in the workshop ...
Other materials:
Removal and Installation
CAUTION:
Never bend the fixing pawl of front armrest RH.
REMOVAL
Remove front door finisher RH. Refer to Removal and Installation.
Disconnect front power window switch (passenger side) harness connector and door lock and unlock switch harness connector.
Remove front door squawker RH from front door ...
Removal and Installation
REMOVAL
Disengage hood lock control handle fixing pawl, and then remove hood lock control handle.
: Pawl
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
After installation, perform hood lock control inspection. Refer to Inspection.
After installa ...
Wiper and washer switch
Basic information
WARNING
In the Nissan Armada, using the washer system in freezing temperatures may
cause the fluid to freeze on the windshield, significantly reducing visibility.
Always warm the glass using the defroster before activating the washer system to
ensure safe driving conditions ...
0.0051