
![]() | Transfer assembly | ![]() | Air breather hose A | ![]() | Clip A |
![]() | Hose connector | ![]() | Clip B | ![]() | Air breather hose B |
![]() | Clip C | ![]() | Air breather | ||
![]() | : Always replace after every disassembly. | ||||
Air Breather
Removal and InstallationDiagnosis Procedure
CHECK SEAT CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT
Check driver seat control unit power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK POWER SEAT SWITCH GROUND CIRCUIT
...
Work Procedure
CAUTION:
Always use CONSULT for the yaw rate sensor calibration. (It cannot be adjusted other than with CONSULT.)
CHECK THE VEHICLE STATUS
Stop the engine.
Ignition switch OFF (Auto ACC function OFF).
Is the vehicle stopped in the straight-ahead position on level surface?
YES>>
GO TO 2.
NO& ...
SRT Set Driving Pattern
CAUTION:
Always drive the vehicle in safe manner according to traffic conditions and obey all traffic laws.
*1: Depress the accelerator pedal until vehicle speed is 90 km/h (56 MPH), then release the accelerator pedal and keep it released for more than 10 seconds. Depress the accelerator pedal until ...