
![]() | Rear final drive assembly | ![]() | Side oil seal | ||
: Vehicle front | |||||
: Always replace after every disassembly. | |||||
Side Oil Seal
Removal and InstallationDiagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning part.
CHECK LOW BEAM REQUEST SIGNAL
With CONSULT
Select “Low beam request” in “Data Monitor” mode of “ ...
Rear Seat Crossmember
WARNING:
Work after rear fender, outer rear sill reinforcement, outer rear wheelhouse, inner rear wheelhouse, and rear floor front are removed.
Weld "view F" as shown in the illustration after installing the rear floor front.
Unit: mm (in) : Vehicle front : Drill φ7 mm (0.28 in) hole for the plug ...
Diagnosis Procedure
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT
Check that DTC is not detected with automatic back door control unit.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to DTC Index.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to Component Function Check. ...