
![]() | Stabilizer bar | ![]() | Stabilizer bushing | ![]() | Stabilizer clamp |
![]() | Stabilizer connecting rod | ![]() | Lower link | ||
: N·m (kg-m, ft-lb) | |||||
Front Stabilizer
Removal and InstallationSanding
Aluminum alloy panels are softer than steel plates. It is important to select the proper type and grade of sanding disc. Also, care must be taken not to overgrind the surface.
Because aluminum powder is light and tends to float in the air, eyes and respiratory parts of the body must be fully protect ...
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
Before servicing, ignition switch OFF, disconnect battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refe ...
Service After Replacing or Removing Engine Parts
×:Applicable
Part name Service performed Service Manual item Reference Replacement Removal ECM × — Additional service when replacing ECM Refer to Work Procedure. Accelerator pedal position sensor × ×*1 Accelerator pedal released position learning Refer to Work Procedure. Electr ...