
![]() | Frame | ![]() | Stopper rubber | ![]() | Suspension arm |
![]() | Axle housing | ||||
![]() | : Always replace after every disassembly. | ||||
![]() | : N·m (kg-m, ft-lb) | ||||
Suspension Arm
Removal and InstallationWork Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
Check DTC.
Perform the following procedure if DTC is detected.
Record DTC and freeze frame data (Print them out using CONSULT.)
Erase DTC.
Ar ...
Diagnosis Procedure
CHECK DTC WITH AIR BAG DIAGNOSIS SENSOR UNIT
Check that DTC is not detected with air bag diagnosis sensor unit.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to DTC Index.
CHECK COMBINATION METER
Check combination meter. Refer to Work flow.
Is the inspection result normal? ...
Inspection
WARNING:
BRAKE FLUID LEVEL
Check that the brake fluid level in the reservoir tank is within the standard (between MAX − MIN lines).
Visually check for any brake fluid leakage around the reservoir tank.
Check the brake system for any leakage if the fluid level is extremely low (lower than MIN).
Ch ...