For exploded view of front center air bag module, refer to Exploded View.
Removal and InstallationRemoval and Installation
REMOVAL
Fully open front door.
Apply a protective tape (A) on the parts to protect it from damage.
Disengage fixing clips using a remover tool (A).
: Clip
Cut double-sided tape using a remover tool and cutter.
CAUTION:
Remove double-sided tape remaining on body side panel with a double-side ...
Work Procedure
CAUTION:
Always use CONSULT for the yaw rate sensor calibration. (It cannot be adjusted other than with CONSULT.)
CHECK THE VEHICLE STATUS
Stop the engine.
Ignition switch OFF (Auto ACC function OFF).
Is the vehicle stopped in the straight-ahead position on level surface?
YES>>
GO TO 2.
NO& ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...