
![]() | Front bumper reinforcement | ![]() | Distance sensor bracket | ![]() | Distance sensor |
![]() | : N·m (kg-m, in-lb) |
Distance Sensor
Removal and InstallationInspection of Welded Portions
Refer to the inspection method for spot welding. Refer to Inspection of Welded Portion.
Sample defects and welding conditions of MAG welding.
Defect Check points Remarks
Is correct wire selected?
Is gas sealed properly?
Is weld joint surface clean?
Is weld zone quickly cooled?
A hole is made w ...
Diagnosis Procedure
CHECK DOOR MIRROR MECHANISM
Check for the following.
Mechanism deformation or pinched foreign materials.
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK DOOR MIRROR CIRCU ...
Removal and Installation
WARNING:
REMOVAL
Remove fender protector RH. Refer to Removal and Installation.
Remove 12V sub battery (lithium ion battery) harness 1 bracket. Refer to Exploded View (If necessary).
Release clip and remove air breather hose assembly from bracket .
Separate the air breather hose from air breath ...