Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
WARNING:
REMOVAL
Remove front bumper fascia. Refer to Removal and Installation.
Disconnect the harness connector from the distance sensor.
Mounting the distance sensor bracket Remove the bolts 
and remove the distance sensor bracket from the front bumper reinforcement.
Remove the distance sensor mounting nuts and remove the distance sensor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
If remove the distnace sensor, perform "DISTANCE SENSOR ADJUSTMENT". Refer to Work Procedure.
If distance sensor is being replaced or has been disconnected, perform "ADDITIONAL SERVICE WHEN REPLACING DISTANCE SENSOR". Refer to Work Procedure. Refer to Work Procedure.
Exploded View
Front bumper reinforcement Distance sensor bracket Distance sensor : N·m (kg-m, in-lb) ...
Side Radar
...
Other materials:
Removal and Installation
WARNING:
REMOVAL
Disconnect battery cable from negative terminal. Refer to Removal and Installation.
Remove drive belt. Refer to Removal & Installation.
Remove inlet air duct 2. Refer to Removal and Installation.
Disconnect alternator harness connector .
: Vehicle front
Remove “B” termi ...
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)
Press the LOCK button of Intelligent Key.
Are all doors LOCKED?
YES>>
GO TO 2.
NO>>
Check Intelligent Key system (remote keyless entry function). Refer to System Description.
CHECK HAZARD WARNING LAMP FUNCTION
Check hazard wa ...
Exploded View
Transfer assembly Rear oil seal : Vehicle front : Always replace after every disassembly. : Apply transfer fluid. ...
0.0054