Nissan Armada 2025-2026 Service and Repair Manual: Fender Protector

Removal and Installation

REMOVAL Remove rear fillet molding rear fixing clips and screws . Apply protective tape (A) on the part to protect it from damage. Insert a remover tool (A) between rear fillet molding rear and r ...

Exploded View

Off Road Models Fender protector Spring nut Fender clip Grommet N·m (kg-m, in-lb) City Models Fender protector Spring nut Fender clip Grommet N·m (kg-m, in-lb) ...

Other materials:

Inspection
WARNING: OIL LEAKAGE Make sure that oil is not leaking from final drive assembly or around it. OIL LEVEL Remove engine under cover. Refer to Exploded View. CAUTION: The ignition switch OFF while checking oil level. Oil level should be level with bottom of filler plug mounting hole. Add gear oil if ...

Removal and Installation
CAUTION: Always work with a helper. REMOVAL Tilt glass lid up. Disengage side trim from glass lid. Remove glass lid fixing screws . Remove glass lid from vehicle. INSTALLATION Note the following items, and then install in the reverse order of removal. CAUTION: After installing the glass lid, per ...

Removal and Installation
WARNING: REMOVAL The ignition switch OFF. CAUTION: Wait for 60 seconds after the ignition switch OFF. Disconnect negative battery terminal. Refer to Removal and Installation. Remove glove box cover. Refer to Removal and Installation. Disconnect transfer control unit harness connector. INSTALLATION ...