WARNING:
REMOVAL
Remove front side spoiler (with front side spoiler). Refer to Removal and Installation.
Remove side step. Refer to Removal and Installation.
Remove fender protector mounting bolts and fixing screws and clips.
Remove fender clips, and then remove fender protector.
Remove spring nuts from fender protector.
INSTALLATION
Install in the reverse order of removal.
Exploded ViewDiagnosis Procedure
CHECK DOOR LOCK ACTUATOR
Check door lock actuator (rear RH).
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Confirm the operation after replacemen ...
Removal and Installation
WARNING:
REMOVAL
NOTE:
CAUTION:
Perform this step when the engine is cold.
Remove Front bumper. Refer to Exploded View.
Remove clip () and remove A/T fluid cooler air guide FR from A/T fluid cooler.
Remove A/T fluid cooler hose A from the A/T fluid cooler using the following procedure:
Remove ...
Three Way Catalyst
If a large amount of unburned fuel flows into the catalyst, the catalyst temperature will be excessively high. To prevent this, follow the instructions.
Use unleaded gasoline only. Leaded gasoline will seriously damage the three way catalyst.
When checking for ignition spark or measuring engine comp ...