Removal and Installation
REMOVAL
Remove TORX bolts, and then remove front door striker.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Never reuse TORX bolt. Always replace it with a new one when it is removed.
-
Before tighten front door striker mounting TORX bolts to the specified torque, perform the fitting adjustment. Refer to Adjustment.
Other materials
Condenser
Exploded View
Radiator
Condenser outlet pipe
O-ring
Condenser & liquid tank assembly
Condenser seal
Refrigerant pressure sensor
Condenser inlet pipe
: Pawl
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
, , : Indicate ...
Rear Wheel House Protector
Exploded View
Rear wheel house protector
Grommet
U nut
Removal and Installation
WARNING:
REMOVALRemove rear wheel house protector mounting bolts, nuts, and fixing clips, and then remove rear wheel house protector.
Remove U nut from rear wheel house protector.INSTALLATIONInstall in ...
Front Propeller Shaft: 2f C-C
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
LOOSENESS OF CONNECT ...