Disc RotorRemoval and Installation
REMOVAL
Remove the back door finisher. Refer to Removal and Installation.
Remove the rear camera mounting screws , then remove the rear camera .
INSTALLATION
Install in the reverse order of removal.
Perform parameter writing. (With ProPILOT Assist 2.1) Refer to Work Procedure.
Perform camera imag ...
Frame Vehicle Construction
(1) FEATURES OF FRAME TYPE VEHICLE
The body is bolted to the frame via rubber bushings. Unlike uni-bodies, the suspensions and power train units are assembled to independent frames. The frames support the weights of these components and absorb any incoming impact from outside, providing a structure ...
Hoses
HOSE REMOVAL AND INSTALLATION
To prevent damage to rubber hose, do not pry off rubber hose with tapered tool or screwdriver.
To reinstall the rubber hose securely, check that hose insertion length and orientation is correct. (If tube is equipped with hose stopper, insert rubber hose into tube until ...