Exploded View
Removal and InstallationExploded View
Stabilizer bar Stabilizer bushing Stabilizer clamp Front lower link  Stabilizer connecting rod : N·m (kg-m, ft-lb) ...
Removal and Installation
WARNING:
REMOVAL
Remove rear final drive assembly. Refer to Removal and Installation.
NOTE:
It is necessary to remove rear final drive assembly to remove/install the side oil seal.
Remove side oil seal, using side oil seal puller (A) [SST: KV10122000 (NI-53383)] and sliding hammer (B) (commercial s ...
Inspection
WARNING:
FLUID LEAKAGE
FLUID LEVEL
CAUTION:
Never start engine while checking fluid level.
Install filler plug on transfer and then tighten to the specified torque.
CAUTION:
Never reuse filler plug.
Specified torque : 37.5 N·m (3.8 kg-m, 28 ft-lb) ...